USB
for Windows NT 4.0 by
Bsquare
USB For Windows® NT® 4.0 allows you to use
plug-and-play USB (Universal Serial Bus) mice, keyboards, printers, and Pocket
PC cradles (HP Jornada 545/548, Compaq iPaq and the Socket Compact Flash card)
on your Microsoft® Windows NT 4.0 PC. Windows NT 4.0 users, both
enterprise users and consumers, can get off-the-shelf USB capability without
having to upgrade their operating system, use a dual boot system, or develop
device drivers. The easy-to-use USB For Windows NT 4.0 solution adds
flexibility and helps people working in a Windows NT 4.0 environment realize
the benefits of combining the features of Windows NT 4.0 and USB mice,
keyboards, printers, and Pocket PC cradles. USB For Windows NT 4.0 does not
support any other devices, or hubs that support the four devices, than the
ones listed above, mice, keyboards, printers, and Pocket PC cradles.
- Single user license: $39.95
Back to Top
USB Hardware with USB NT
Support
Freedom USB Series by Quatech - Win NT Drivers are available for all Serial/USB
adapters.
IomegaWare 3.06 by
Iomega
- Supports NT 4.0 USB with Zip
drives and adapters, Jaz® drives and
adapters, and the PocketZip PC Card drive.
- Download
IomegaWare from Iomega
- Cost - Free
- Only provides USB Support for
listed Iomega USB devices.
EdgePort
Adapter by IONetworks - EdgePort Adapter is a USB to Serial Adapter
that is compatible with Win NT 4.0
WatchPort V USB Camera by IONetworks
- USB Camera with drivers for WinNT. This is the renowned 3COM Home
Connect Camera with updated drivers and Win NT compatibility.
EdgePort
USB Driver Stack for WinNT by IONetworks for use by USB Developers
HP
PhotoSmart S20 Scanner by HP - Supports NT 4.0 USB with specifically
written proprietary drivers.
Orb
Drive by Castlewood Win NT USB Support CC-NT40
Silicom
Ethernet Adapter U2E by Silicom Connectivity Solutions - USB Ethernet
Adapter with proprietary Win NT 4.0 USB drivers.
PortStation
by Intel (Xircom) - Network, Parallel, Serial, PS2, USB and Modem expansion through a
single USB port with Win NT USB support.
- Plug-and-play with any computer
running Windows 95 OSR 2.1 (version 950b or later), Windows 98, Windows NT
4.0 (SP3 or later) or Windows 2000
- 7 Port USB Hub Starter Kit - $119.00
Please Note:
Devices that
support USB for Win NT 4.0 through the use of proprietary drivers and software
may and often do conflict with each other. Some combinations of these
devices may be impossible to configure or impractical to use.
Additional WinNT 4.0 USB Information and
Links
Note:
The information on this page is provided as a public service. The links,
information and sites are not necessarily endorsed by USBMan
Back to Top
USBMan
05/10/2003
