WWWBoard New Message: Message 1011: Re: Fatal exception error

WWWBoard New Message: Message 1011: Re: Fatal exception error

WWWBoard: Message 1011

Posted by Bill D. on 06/09/02 at 10:44 PM

Subject: Re: Fatal exception error

Message Posted

In Reply to: Re: Fatal exception error posted by Dave on 06/09/02 at 6:31 PM:

Man you have a lot of stuff on that PC! You need to do something about the IRQ-sharing. If you can, disable the Com port in BIOS setup. Also consider disabling the LPT port if you have a USB printer. While in BIOS setup, find the PCI section and set OS type to PnP, Auto and Reset Configuration Data/ESCD.

Next, pick up the latest 4-in-1 drivers and Filter patch:

http://www.viaarena.com/?PageID=2

*Don't install the Filter Patch unless the 4-in-1s fail.*

Bill

: Here is the IRQ list...

: 0 System timer
: 1 Standard 101/102-Key or Microsoft Natural Keyboard
: 2 Programmable interrupt controller
: 3 (free)
: 4 Communications Port (COM1)
: 5 ACPI IRQ Holder for PCI IRQ Steering
: 5 VIA Tech 3038 PCI to USB Universal Host Controller
: 5 VIA Tech 3038 PCI to USB Universal Host Controller
: 5 ESS SOLO-1 PCI AudioDrive
: 5 Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4)
: 6 Standard Floppy Disk Controller
: 7 ECP Printer Port (LPT1)
: 8 System CMOS/real time clock
: 9 SCI IRQ used by ACPI bus
: 10 ACPI IRQ Holder for PCI IRQ Steering
: 10 Texas Instruments OHCI IEEE 1394 Host Controller
: 10 Diamond HomePNA & Ethernet Based Adapter
: 11 ACPI IRQ Holder for PCI IRQ Steering
: 11 Lucent V90+DSL Modem
: 11 3dfx Voodoo3
: 12 WheelMouseIM (PS/2)
: 13 Numeric data processor
: 14 Primary IDE controller (dual fifo)
: 14 VIA Bus Master PCI IDE Controller
: 15 Secondary IDE controller (dual fifo)
: 15 VIA Bus Master PCI IDE Controller

: Thanks a lot for your help!

: : Update your BIOS first.

: : Open System Information (MSINFO32.EXE) and navigate to Hardware Resources > IRQs. Click anywhere in the right pane and then press CTRL-A and then CTRL-C. You have copied that data to the clipboard. Paste that data in a reply here.

: : Bill

: : : Running WIN 98SE, Compaq 5716 PIII 450Mhz, 352K RAM available, Voodoo 3 AGP. Installed hardware/software for the Logitech Momo FF steering wheel using the Logitech Wingman v4.11.c software. When the USB connector is pushed into the USB port,
: : : I get a message that Windows is building a driver database, and then a blue screen that reads:

: : : "A fatal exception 0E has occurred at 0028:FF16F782 in VXD LHidHi(02) + 00000022. The current application will be terminated."

: : : After rebooting...all other apps/hardware works fine.

: : : Has anyone run across this problem before?

Follow Ups:

Post a Followup

Name:
E-Mail:
Subject:

Message to Post

: Man you have a lot of stuff on that PC! You need to do something about the IRQ-sharing. If you can, disable the Com port in BIOS setup. Also consider disabling the LPT port if you have a USB printer. While in BIOS setup, find the PCI section and set OS type to PnP, Auto and Reset Configuration Data/ESCD.

: Next, pick up the latest 4-in-1 drivers and Filter patch:

: http://www.viaarena.com/?PageID=2

: *Don't install the Filter Patch unless the 4-in-1s fail.*

: Bill

: 
: : Here is the IRQ list...

: : 0   System timer
: : 1   Standard 101/102-Key or Microsoft Natural Keyboard
: : 2   Programmable interrupt controller
: : 3   (free)
: : 4   Communications Port (COM1)
: : 5   ACPI IRQ Holder for PCI IRQ Steering
: : 5   VIA Tech 3038 PCI to USB Universal Host Controller
: : 5   VIA Tech 3038 PCI to USB Universal Host Controller
: : 5   ESS SOLO-1 PCI AudioDrive
: : 5   Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4)
: : 6   Standard Floppy Disk Controller
: : 7   ECP Printer Port (LPT1)
: : 8   System CMOS/real time clock
: : 9   SCI IRQ used by ACPI bus
: : 10  ACPI IRQ Holder for PCI IRQ Steering
: : 10  Texas Instruments OHCI IEEE 1394 Host Controller
: : 10  Diamond HomePNA & Ethernet Based Adapter
: : 11  ACPI IRQ Holder for PCI IRQ Steering
: : 11  Lucent V90+DSL Modem
: : 11  3dfx Voodoo3
: : 12  WheelMouseIM (PS/2)
: : 13  Numeric data processor
: : 14  Primary IDE controller (dual fifo)
: : 14  VIA Bus Master PCI IDE Controller
: : 15  Secondary IDE controller (dual fifo)
: : 15  VIA Bus Master PCI IDE Controller

: : Thanks a lot for your help!

: 
: : : Update your BIOS first.

: : : Open System Information (MSINFO32.EXE) and navigate to Hardware Resources > IRQs. Click anywhere in the right pane and then press CTRL-A and then CTRL-C. You have copied that data to the clipboard. Paste that data in a reply here.

: : : Bill

: : : : Running WIN 98SE, Compaq 5716 PIII 450Mhz, 352K RAM available, Voodoo 3 AGP. Installed hardware/software for the Logitech Momo FF steering wheel using the Logitech Wingman v4.11.c software. When the USB connector is pushed into the USB port, 
: : : : I get a message that Windows is building a driver database, and then a blue screen that reads:

: : : : "A fatal exception 0E has occurred at 0028:FF16F782 in VXD LHidHi(02) + 00000022. The current application will be terminated."

: : : : After rebooting...all other apps/hardware works fine.

: : : : Has anyone run across this problem before?

[ Posting Rules | Follow Ups | Return to WWWBoard ]