In Reply to: Re: Win98SE Hangs during Boot when USB Device Connected to USB 2.0 Port posted by Dave on 06/17/02 at 10:33 PM:
Have you visted Windows Update?
Bill
: : I would update the BIOS. Have you installed the final USB 2.0 driver?
: : Bill
: : : Hi,
: : : I have an GA-7VRX by Gigabyte (uses the VIA KT-333 Chipset) mobo based system with an AMD Athlon XP 1800+, 512 DDR333 RAM, ATI Radeon 8500LE 64 MB DDR Video, SB Live 5.1 Audio, Maxtor ATA-133 80GB drive, DVD & CD-R/W....
: : : Generally the system runs great. But when I tried to add on my Epson 777 printer using a USB 2.0 port, the system will hang during Bootup with the USB cable connected and the power on.
: : : I can connect the cable AFTER bootup and it will print and run fine.
: : : The USB 2.0 is by VIA VT6202 on board controller. I have installed the latest drivers from VIA, but with no effect.
: : : If I use the southbridge provided onboard USB 1.1, the printer works great and the system boots normally.
: : : This is very frustrating to say the least...but I guess it could be worse, from what I have read in this forum.
: : : Any ideas ??
: Hi,
: I have the most recent BIOS from the GigaByte site.
: What drivers do you mean when you say about the "Final" USB 2.0 Driver ??
: Dave