In Reply to: Re: USB won't work after Win2k upgrade posted by Bill D. on 05/14/02 at 9:18 AM:
: Aha! USB is not enabled in BIOS setup. Iomega works some real magic with their USB drivers and can actually make dead ports work - even on NT4.
: Boot into BIOS setup (usually Del or F10) and find
: "IRQ for USB", "USB Function" and/or "USB Keyboard" and enable all you find.
: You should get full USB function on startup. You may have to uninstall Iomegaware and reinstall it later.
: : Bill,
: : Here is the information you requested.
: : John
: : System Information report written at: 05/14/2002 02:52:09 PM
: : [IRQs]
: : IRQ Number Device
: : 9 SCSI/RAID Host Controller
: : 9 Iomega USB Driver For Mass Storage
: : 9 3Com Windows Modem PCI ADI
: : 11 NVIDIA GeForce2 MX/MX 400
: : 14 Primary IDE Channel
: : 15 Secondary IDE Channel
: : 10 Realtek RTL8139/810X Family PCI Fast Ethernet NIC
: : 1 PC/AT Enhanced PS/2 Keyboard (101/102-Key)
: : 4 Communications Port (COM1)
: : 6 Standard floppy disk controller
: : 8 System CMOS/real time clock
: : 13 Numeric data processor
: : 12 Microsoft PS/2 Mouse