In Reply to: Re: Connection problem causes Optical USB mouse to Freeze posted by Canyon on 05/14/02 at 9:07 PM:
Check the VIA tips page that I gave you. All that you need to know is there.
http://www.usbman.com/Guides/VIA%20Tips%20and%20Tricks.htm
Bill
: Sorry, I am currently using a non USB NIC, my usb ports are both for my printer and mouse
: : Please answer my question. Is it a USB NIC or modem?
: : The IRQs look good, but you have a VIA host controller. If you're using a USB modem, you *will* have problems. Go here:
: : http://www.usbman.com/Guides/VIA%20Tips%20and%20Tricks.htm
: : Bill
: : : I have cable modem and sometimes service craps out or gets heavy...
: : : 0 System timer
: : : 1 Standard 101/102-Key or Microsoft Natural Keyboard
: : : 2 Programmable interrupt controller
: : : 3 (free)
: : : 4 (free)
: : : 5 Creative SB Live! Value
: : : 5 ACPI IRQ Holder for PCI IRQ Steering
: : : 6 Standard Floppy Disk Controller
: : : 7 SCI IRQ used by ACPI bus
: : : 8 System CMOS/real time clock
: : : 9 VIA Tech 3038 PCI to USB Universal Host Controller
: : : 9 VIA Tech 3038 PCI to USB Universal Host Controller
: : : 9 ACPI IRQ Holder for PCI IRQ Steering
: : : 10 Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4)
: : : 10 ACPI IRQ Holder for PCI IRQ Steering
: : : 11 RADEON 7200/RADEON
: : : 11 ACPI IRQ Holder for PCI IRQ Steering
: : : 12 PS/2 Compatible Mouse Port
: : : 13 Numeric data processor
: : : 14 Primary IDE controller (dual fifo)
: : : 14 VIA Bus Master PCI IDE Controller
: : : 15 Secondary IDE controller (dual fifo)
: : : 15 VIA Bus Master PCI IDE Controller
:
: : : : Why would your NIC boot you from the Net? Is it a USB NIC?
: : : : Open System Information (MSINFO32.EXE) and navigate to Hardware Resources > IRQs. Click anywhere in the right pane and then press CTRL-A and then CTRL-C. You have copied that data to the clipboard. Paste that data in a reply here.
: : : : Bill
: : : : : Whenever my NIC boots me from net, my intellimouse explorer locks up... IF I then let it sit like that, the whole system locks up as well. :( I thot it was an irq issue but I resolved that and it still bugs out :(
: : : : : System:
: : : : : 98 SE, 1 ghz t-bird, 512 ram, Iwill 266 mobo, SB live, Lynksys ethernet card, Radeon ddr 64