: 0 System timer1 Standard 101/102-Key or Microsoft Natural Keyboard
2 Programmable interrupt controller
3 (free)4 Communications Port (COM3)
4 Communications Port (COM1)
5 MPU-401 Compatible
6 Standard Floppy Disk Controller
7 Printer Port (LPT1)
8 System CMOS/real time clock
9 NETGEAR FA311 Fast Ethernet PCI Adapter
9 U.S. Robotics 56K Win INT
9 Intel(R) 810e Chipset Graphics Driver (DC133 FSB133) PV 2.1
9 IRQ Holder for PCI Steering
9 IRQ Holder for PCI Steering
10 Intel 82801AA USB Universal Host Controller
10 IRQ Holder for PCI Steering
11 Intel(r) 82801AA AC'97 Audio Controller - SigmaTel Codec
11 IRQ Holder for PCI Steering
12 PS2 Pilot Mouse V1.0013 Numeric data processor14 Primary IDE controller (dual fifo)
14 Intel 82801AA Bus Master IDE Controller15 Secondary IDE controller (dual fifo)
15 Intel 82801AA Bus Master IDE Controller

: The individual ports do not show in Device Manager - just the Root Hub and Host Controller.: Open System Information (MSINFO32.EXE) and navigate to Hardware Resources > IRQs. Click anywhere in the right pane and then press CTRL-A and then CTRL-C. You have copied that data to the clipboard. Paste that data in a reply here.: Bill: : I recently bought camera w/usb connection. Whn i plugged into 2nd port, it did nothing. I was told that there should be 2 USB ports listed in system properties and it should be enabled. Since I am partially pc literate, can someone advised me how to correctly ascertain if there is a 2nd port on my sytem porperties and how to enable it. I am using Win98 SE on 500 mhz pc.