In Reply to: Disk Write Error For Maxtor 3000LE USB 2.0 Eternal Hard Drive posted by GLB on 05/26/02 at 3:02 PM:
Funny...I don't see the NEC "Enhanced" USB Host controller there. You need that.
Are you powering the cardbus adapter? It needs juice.
Open System Information (MSINFO32.EXE) and navigate to Hardware Resources > IRQs. Click anywhere in the right pane and then press CTRL-A and then CTRL-C. You have copied that data to the clipboard. Paste that data in a reply here.
: Unable to install Maxtor Drive until a tech worked with me and we got it to install on the laptop's USB 1.1 port, but not the new I/O Gear USB 2.0 - we thought it defective or incompatible.
: Purchased a BusLink USB 2.0 card bus. It installed fine. So here is where I am now:
: 1. My Logitech USBMouse works fine on the BusLink USB 2.0 card bus (I never thought to try it with the I/O card bus).
: 2. My Maxtor 3000LE USB 2.0 Hard drive does not work on the BusLink USB 2.0 card bus - I get a Disk Write Error:"Unable to Write to Disk" which I also got with the I/O card bus.
: 3. The Maxtor 3000LE works fine using the laptop's USB 1.1 port.
: Sony Vaio Laptop
: AMD Duron 800 M
: 256 RAM
: Windows ME 4.90.3000
: Two USB 1.1 ports
: (Sony won't help with third party problems, no new drivers, no BIOS update at this time)
: Device Driver - Universal Serial Bus COntrollers - there are 11 entries.
: 1. Buslink USB 2.0 Host Controller - IR 10
: 2. Maxtor USB Drive
: 3. NEC USB Open Host Controller (E13+) - IR 10
: 4. NEC USB Open Host Controller (E13+) - IR 10
: 5. USB 2.0 Root Hub Drive
: 6. USB Root Hub - 1 port(self-powered Maxtor USB Drive)
: 7. USB Root Hub - 2 ports(self-powered)
: 8. USB Root Hub - 3 ports (self-powered)
: 9. USB Root Hub - 1 port (USB Optical WheelMouse)
: 10. VIA Tech 3038 PCI to USB Universal Host Controller - IR 9
: 11. VIA Tech 3038 PCI to USB Universal Host Controller - IR 9
: USB Hardware I have:
: 4-port Buslink USB 2.0 Card bus (this can be self-powered. I used it plugged into AC and not plugged into AC)
: 4-port Asarte USB Hub (USB 1.1)
: Iomega 100 ZIP Drive (external USB 1.1)
: Kodak USB Picture Card Reader (external USB 1.1)
: Canon USB printer (not installed)
: I can also be reached at firstname.lastname@example.org
: Any ideas? And Thanks!