In Reply to: Re: USB 2.0 Predator CDRW unable to burn CDs posted by Frustrated! on 06/01/02 at 4:33 AM:
Did you check your writer software for maybe needed updates for proper USB2 support?
Jason
: Ok. Heres my IRQ info you wanted. Is it possible I have a conflicting IRQ, but its not showing up in the system? I also tried using a USB 1.0 HP CDRW in the USB 2.0 port and the same problem occurs.
: IRQ 0 System timer OK
: IRQ 1 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard OK
: IRQ 4 Communications Port (COM1) OK
: IRQ 5 Intel(R) 82801CA/CAM SMBus Controller - 2483 OK
: IRQ 6 Standard floppy disk controller OK
: IRQ 8 System CMOS/real time clock OK
: IRQ 9 Microsoft ACPI-Compliant System OK
: IRQ 9 Mobility Radeon OK
: IRQ 9 Standard Universal PCI to USB Host Controller OK
: IRQ 9 Standard Universal PCI to USB Host Controller OK
: IRQ 9 Standard Universal PCI to USB Host Controller OK
: IRQ 9 Conexant Intl HSFi V92 MiniPCI Modem OK
: IRQ 9 Texas Instruments OHCI Compliant IEEE 1394 Host Controller OK
: IRQ 9 Texas Instruments PCI-1410 CardBus Controller OK
: IRQ 9 NEC PCI to USB Enhanced Host Controller OK
: IRQ 9 NEC PCI to USB Open Host Controller OK
: IRQ 9 NEC PCI to USB Open Host Controller OK
: IRQ 9 Intel(R) PRO/100 VE Network Connection OK
: IRQ 9 SoundMAX Integrated Digital Audio OK
: IRQ 12 Logitech-compatible Mouse PS/2 OK
: IRQ 13 Numeric data processor OK
: IRQ 14 Primary IDE Channel OK
: IRQ 15 Secondary IDE Channel OK
:
: Thanks,
: Dale
: : Open System Information (MSINFO32.EXE) and navigate to Hardware Resources > IRQs. Click anywhere in the right pane and then press CTRL-A and then CTRL-C. You have copied that data to the clipboard. Paste that data in a reply here.
: : Bill
: : : Ive recently installed my new USB 2.0 Predator CDRW drive in my Compaq Presrio laptop, which is running XP Pro. XP reconizes the burner and the burner can read CDs, but I am unable to burn any type of CD. Ive tried using different brands of CDs and tried burning a slower speeds. So, I connected the CDRW to a normal USB 1.0, and it will burn CDs without any problems. Also, Im using a PUC-102 host adapter. Im thinking the adapter may be faulty, since it allows reading but not writting. Any one have some suggestions?
