WWWBoard New Message: Message 1037: Re: Thrustmaster Dual Power USB



WWWBoard: Message 1037


[ Follow Ups ] [ Post Followup ] [ ]



   Posted by Stuart on 10/29/02 at 2:24 PM

Subject:   Re: Thrustmaster Dual Power USB


Message Posted

In Reply to: Re: Thrustmaster Dual Power USB posted by Bill D. on 10/27/02 at 8:39 PM:

Bill

Tried the link and downloaded the update. It was a good shot, but no dice at this end. Nothing happens and everything's still tits up!! Unless you've got any further ideas, I'll take it back to the shop!

Stu

: This tells me that you have:

: 1. The AMD host controller. Here's a possible fix:

: http://support.microsoft.com/default.aspx?scid=KB;EN-US;Q241134&

: 2. You are using ACPI. That in itself may be an issue. We'll tackle it later if need be.

: Bill

: : Bill,

: : Here's the info from the MSinfo file. Does this mean anything to you???!

: : Stuart

: : 0 System timer
: : 1 Standard 101/102-Key or Microsoft Natural Keyboard
: : 2 Programmable interrupt controller
: : 3 Communications Port (COM2)
: : 4 Communications Port (COM1)
: : 5 Crystal PnP Audio System CODEC
: : 6 Standard Floppy Disk Controller
: : 7 Printer Port (LPT1)
: : 8 System CMOS/real time clock
: : 9 Crystal PnP Audio System MPU-401 Compatible
: : 10 AMD-756 PCI to USB Open Host Controller
: : 10 ACPI IRQ Holder for PCI IRQ Steering
: : 11 NVIDIA GeForce2 MX 100/200
: : 11 Ambient HaM Data Fax Voice
: : 11 ACPI IRQ Holder for PCI IRQ Steering
: : 11 SCI IRQ used by ACPI bus
: : 12 Microsoft PS/2 Port Mouse
: : 13 Numeric data processor
: : 14 Primary Bus Master IDE controller
: : 14 AMD-756 Bus Master IDE Controller V1.22 RC
: : 15 Secondary Bus Master IDE controller
: : 15 AMD-756 Bus Master IDE Controller V1.22 RC

: :
: : : Open System Information (MSINFO32.EXE) and navigate to Hardware Resources > IRQs. Click anywhere in the right pane and then press CTRL-A and then CTRL-C. You have copied that data to the clipboard. Paste that data in a reply here.

: : : Bill

: : : : Running Win98 SE on an AMD7board. I've installed the drivers that came with the controller and installed the drivers from the windows disk when requested. However, it is still not being recognised in the controller ID window and I get a message saying my Gameport drivers are wrongly configured. I'm not using the gameport, right? Isn't that on the soundcard? Anyway, if anyone's got any tips, all are appreciated.



  

Follow Ups:





Post a Followup

Name:
E-Mail:
Subject:

Message to Post




 



[ Posting Rules | Follow Ups | Return to WWWBoard ]