Windows doesn't like the driver that you supplied for the device or it doesn't get along with the VIA controllers. It's also possible that Windows has some issues. Try for a BIOS update and updated (or older) drivers.

Bill

: : What's happening is that there's a serious crash and Windows is rebooting deliberately. Look in Control Panel > System > Advanced > Startup and Recovery. There, disable the Automatic restart and set the memory dump to None. The next time, you will get the official BSOD (blue screen of death).

: : Open System Information (MSINFO32.EXE) and navigate to Hardware Resources > IRQs. Click anywhere in the right pane and then press CTRL-A and then CTRL-C. You have copied that data to the clipboard. Paste that data in a reply here.

: : Also download and install the VIA 4in1 drivers here:

: : http://www.viaarena.com/?PageID=2

: : Bill

: : : I have win xp i just got new printer tried to install it with usb install solfware but when i tried to plug into usb sys. crashes and win reboots and reboots and reboots.This happen with any thing i install in usb but not the keyborad,or mouse.The controller is VIA TECH.

: IRQ 0 System timer OK
: IRQ 4 Communications Port (COM1) OK
: IRQ 6 Standard floppy disk controller OK
: IRQ 8 System CMOS/real time clock OK
: IRQ 9 Microsoft ACPI-Compliant System OK
: IRQ 13 Numeric data processor OK
: IRQ 14 Primary IDE Channel OK
: IRQ 15 Secondary IDE Channel OK
: IRQ 16 NVIDIA GeForce4 Ti 4600 OK
: IRQ 16 VIA Rev 5 or later USB Universal Host Controller OK
: IRQ 16 Creative SB Audigy OK
: IRQ 17 VIA USB 2.0 Enhanced Host Controller OK
: IRQ 17 OHCI Compliant IEEE 1394 Host Controller OK
: IRQ 18 Intel(R) 536EP V.92 Modem OK
: IRQ 19 VIA Rev 5 or later USB Universal Host Controller OK
: IRQ 19 3Com EtherLink 10/100 PCI For Complete PC Management NIC (3C905C-TX) OK
: IRQ 21 VIA Rev 5 or later USB Universal Host Controller OK
: IRQ 21 VIA Rev 5 or later USB Universal Host Controller OK
: ALSO INSTALLED 4-1 FROM VIA NO LUCK