WWWBoard New Message: Message 1877: Re: VIA VT82C693A chipset

WWWBoard New Message: Message 1877: Re: VIA VT82C693A chipset - USB problems!!!

WWWBoard: Message 1877

Posted by Bill D. on 12/03/02 at 6:38 PM

Subject: Re: VIA VT82C693A chipset - USB problems!!!

Message Posted

In Reply to: Re: VIA VT82C693A chipset - USB problems!!! posted by Ricardo Miguel on 12/03/02 at 6:33 PM:

Typical oddball VIA behavior. It's best to cut your losses and install a 3rd-party USB PCI card. Take this opportunity to upgrade to USB 2.0. USB Wholesale offers a very good and inexpensive unit here in the US. The ad is on many USBMan pages. Otherwise, here are some choices:

http://www.adaptec.com/worldwide/product/proddetail.html?prodkey=AUA-3100LP&cat=%2fTechnology%2fUSB%2fUSB+Adapters

http://www.adstech.com/products/USB_Turbo_2.0/intro/USB2.0.asp?pid=USBX-2000

http://catalog.belkin.com/IWCatProductPage.process?Merchant_Id=1&Section_Id=1895&pcount=&Product_Id=107412&Section.Section_Path=%2F%2FRoot%2FUSB%2FPCProducts%2FUpgradesPCICards%2F

http://www.iogear.com/products/product.php?Item=GIC250U

http://www.siig.com/products/usb/usb2_5portPCI.html

Bill

: Hi!

: I have already done that, but the error continues...
: The exact error is the following:

: When I try to print something, from word, for example, it starts printing, and right after the document has been spooled, it stops and gives a error message saying that document failed to print. What can it be?

:
: : That was a mistake.
: : Reinstall the VIA 4 in 1 drivers.

: : Jeff Roberts
: : USBMan

: : : Hi!Sorry, forgot to mention my USB Host controller... its Standard Universal PCI to USB Host Controller... I have already VIA Rev5 Host Controller but I heard they are not quite good and, therefore, uninstalled them... : Hi!: I have a AV61 Shuttle/Spacewalker mainboard with a VIA VT82C693A chipset. I have done all the BIOS settings shown on this site and have also made the device manager cleanup in safe mode of Windows Professional Service Pack 1, but I am unable to put my USB ports to work!: I have a HP Deskjet 959c printer and a OfficeJet psc 2210 all-in-one and each one of them are not recognized by my PC! He is unable to communicate with this machines. For example, when I try to print, I receive a message of "failed to print to....".: Anyone has any suggestions or has passed by this problem with these chipset/mainboard and would like to share its experiences with me?: Thanks in advance.: Ricardo

Follow Ups:

Re: VIA VT82C693A chipset - USB problems!!!

Ricardo Miguel

Re: VIA VT82C693A chipset - USB problems!!!

Bill D.

Post a Followup

Name:
E-Mail:
Subject:

Message to Post

: Typical oddball VIA behavior. It's best to cut your losses and install a 3rd-party USB PCI card. Take this opportunity to upgrade to USB 2.0. USB Wholesale offers a very good and inexpensive unit here in the US. The ad is on many USBMan pages. Otherwise, here are some choices:

: http://www.adaptec.com/worldwide/product/proddetail.html?prodkey=AUA-3100LP&cat=%2fTechnology%2fUSB%2fUSB+Adapters

: http://www.adstech.com/products/USB_Turbo_2.0/intro/USB2.0.asp?pid=USBX-2000

: http://catalog.belkin.com/IWCatProductPage.process?Merchant_Id=1&Section_Id=1895&pcount=&Product_Id=107412&Section.Section_Path=%2F%2FRoot%2FUSB%2FPCProducts%2FUpgradesPCICards%2F

: http://www.iogear.com/products/product.php?Item=GIC250U

: http://www.siig.com/products/usb/usb2_5portPCI.html

: Bill

: : Hi!

: : I have already done that, but the error continues...
: : The exact error is the following:

: : When I try to print something, from word, for example, it starts printing, and right after the document has been spooled, it stops and gives a error message saying that document failed to print.  What can it be?

: : 
: : : That was a mistake.
: : : Reinstall the VIA 4 in 1 drivers.

: : : Jeff Roberts
: : : USBMan

: : : : Hi!Sorry, forgot to mention my USB Host controller... its Standard Universal PCI to USB Host Controller... I have already VIA Rev5 Host Controller but I heard they are not quite good and, therefore, uninstalled them... : Hi!: I have a AV61 Shuttle/Spacewalker mainboard with a VIA VT82C693A chipset. I have done all the BIOS settings shown on this site and have also made the device manager cleanup in safe mode of Windows Professional Service Pack 1, but I am unable to put my USB ports to work!: I have a HP Deskjet 959c printer and a OfficeJet psc 2210 all-in-one and each one of them are not recognized by my PC! He is unable to communicate with this machines. For example, when I try to print, I receive a message of "failed to print to....".: Anyone has any suggestions or has passed by this problem with these chipset/mainboard and would like to share its experiences with me?: Thanks in advance.: Ricardo

[ Posting Rules | Follow Ups | Return to WWWBoard ]