Here are your drivers:

http://www-1.ibm.com/support/dlsearch.wss?pcd=2611-412&rs=0&apar=exclude&submit.x=56&submit.y=6

You need the BIOS update and video driver.

Get chipset drivers here:

ftp://ftp.aliusa.com/driver/Integrated1.091.exe

USB drivers here:

ftp://ftp.aliusa.com/driver/usb103.exe

More help here:

http://www.usbman.com/Guides/ali_tips_and_tricks.htm

Bill

: Hi,

: I've got a philips Toucam Pro 740K usb camera. I'm trying to install it on a thinkpad i series 1400 (2611-412), under Windows 98 (Not SE). Camera works fine on desktop system running Windows 98, but not on laptop.

: Symptoms are, on installation get a single still image - not video, and from then on when I try to use the video, I get a green or black screen, where the video should be.

: I've checked Bios settings (USB enabled), reinstalled webcam loads of times. I've got an 'ALi PCI to USB Open Host Controller', which is gives the device status - working properly. When I use Microsoft System Information - its on IRQ 10, along with IRQ Holder for PCI Steering - nothing else uses IRQ 10.

: Philips say I should update the mainboard chipset drivers, but I am unsure where to get them, or how to go about this. I've done other things that Philips have suggested - turn off video card acceleration, checked Control Panel/Multimedia/Devices/VideoCaptureDevices - its got Microsot WDM Image Capture, set as video capture device.

: Apologies for the length of post, but wanted to pass on as much key information as possible. (I was hoping to get this working before Christmas 2002!).

: Many thanks for any help / direction,

: Meg